Standardized products
DALI lighting control
Solutions for lighting control typically in industrial halls. The system controls lighting connected via the DALI bus based on the value measured by a luxmeter, so the lights do not shine more than necessary, thus reducing electricity costs.
Key features:
- Control of up to 256 lights (DALI addresses)
- Control via web application or local touch display
- Possibility of integration into a higher-level system
- Possibility of specific adjustments and extensions
Regulation of 1/4 h maximum electricity consumption
System for monitoring the contractual ¼ maximum for industrial customers. Regulation is carried out predictively based on measured consumption by switching off selected appliances (regulation channels). The system builds on our long-standing experience with DINOV systems, which are also the basis for the regulation algorithms of the AMIT system on which the system is built.
Key features:
- Up to 32 control channels
- Control via local touch screen or desktop application
- Possibility of integration into a higher-level system
- Individual setting of individual channels
- Consumption archiving
- Consumption archiving according to tariff
- Possibility of expansion with secondary electricity meters
Gas meter reading using ELGAS2 protocol
In the Czech Republic, gas meters manufactured by ELGAS, s.r.o. are used as billing electricity meters for large consumers, which use the ELGAS2 protocol for remote reading and, depending on the type of device, do not have the option of using another protocol. Therefore, we have integrated this protocol into our system, which allows us to download data from the gas meter and, based on the values, regulate the daily contractual maximum or, if necessary, function only as a converter to Modbus/TCP.
Key features:
- Reading out current gas meter values
- Monitoring of exceeding daily maximum
- Integration into higher-level systems
- Possibility of expansion with additional gas meters
- Possibility of functioning as a converter to
Modbus/TCP
Mini switchboard for remote service of PROFIBUS devices
Remote service of devices with an Ethernet interface is practically standard nowadays. There are still, but in operation, many devices that do not have Ethernet. For remote service of these devices, our mini switchboard containing a 4G industrial modem and an Ethernet converter to PROFIBUS/MPI/PPI is used.
Thanks to the switchboard, it is possible to remotely connect and service devices with a PROFIBUS/MPI/PPI interface using a secure VPN connection. All that is needed is to connect the device to the Internet using a 4G network or LAN network.
Key Features:
- Connect via 4G or corporate network with internet access
- Does not require a static IP address
- Compact and easily portable solution
- Supports industrial communication protocols
